Tygon® E-LFL

Tubing for Laboratory Applications
Tygon® E-LFL tubing from Saint-Gobain has been tested rigorously to ensure that it meets the the physical standards of 1,000 hours of peristaltic pump tubing life at 0 psi back pressure and low particulate spallation. Non-aging characteristics and broad chemical resistance provides users with versatility for a wide variety of laboratory applications.
Crystal-clear Tygon® E-LFL tubing is formulated specifically for use in peristaltic pump applications. It has a longer pump life not only at 0 psi but also at back pressure of up to 25 psi. With its superior flex life characteristics, Tygon® E-LFL tubing reduces downtime due to pump tubing failure. Our test demonstrated reduced particle spallation, which eliminates the need for frequent downstream filter replacements and diminishes the risk of sensitive-fluid contamination.
Features & Benefits
- Long flex life – reduces downtime due to pump failure
- Extremely low particle spallation – reliable for sensitive-fluid applications
- Contains no BPA or phthalates
Specifications
Inner Diameter in (mm) | Outer Diameter in (mm) | Wall Thickness in (mm) | Minimum Bend Radius in (mm) | Maximum Working Pressure Psi (Bar) | Vacuum Rating inHg (mmHg) |
---|---|---|---|---|---|
0.75 (19.05) | 1.25 (31.75) | 0.25 (6.35) | 1.75 (44) | 24 (1.7) | 29.9 (760) |
1 (25.4) | 1.375 (34.93) | 0.188 (4.76) | 3.25 (83) | 15 (1) | 5 (127) |
0.063 (1.59) | 0.188 (4.76) | 0.063 (1.59) | 0.25 (6) | 50 (3.5) | 29.9 (760) |
0.125 (3.18) | 0.25 (6.35) | 0.063 (1.59) | 0.5 (13) | 34 (2.3) | 29.9 (760) |
0.188 (4.76) | 0.313 (7.94) | 0.063 (1.59) | 0.75 (19) | 25 (1.7) | 29.9 (760) |
0.25 (6.35) | 0.375 (9.53) | 0.063 (1.59) | 1 (25) | 20 (1.4) | 15 (381) |
0.25 (6.35) | 0.5 (12.7) | 0.125 (3.18) | 0.75 (19) | 35 (2.4) | 29.9 (760) |
0.313 (7.94) | 0.438 (11.11) | 0.063 (1.59) | 1.25 (32) | 16 (1.1) | 10 (254) |
0.375 (9.53) | 0.625 (15.88) | 0.125 (3.18) | 1 (25) | 25 (1.7) | 29.9 (760) |
0.5 (12.7) | 0.75 (19.05) | 0.125 (3.18) | 1.5 (38) | 20 (1.4) | 20 (508) |
Physical Properties
Durometer Hardness Shore A (Shore D) | 56 |
Tensile Strength Psi (Mpa) | 1800 (12.4) |
Ultimate Elongation | 400 |
Tear Resistance, Ib-f/in (kN/m) | 184 (32.2) |
Specific Gravity | 1.17 |
Water Absorption | 0.2 |
Compression Set Constant Deflection | 68 |
Minimum Recommended Operating Temp °F (°C) | -51 (-46) |
Maximum Recommended Operating Temp °F (°C) | 165 (74) |
Brittleness by Impact Temp °F (°C) | -51 (-46) |
Tensile stress at 100% Elongation Psi (Mpa) | 550 (3.8) |
Tensile stress at 200% Elongation Psi (Mpa) | 955 (6.6) |
Characteristics
Markets |
|
Regulation |
|
Peristaltic Pump | Yes |