Tygon® E-1000

Flexible, Food & Beverage Dispensing Tubing
Tygon® E-1000 tubing from Saint-Gobain is engineered for food and beverage dispensers with complicated set-ups, sharp radius curves, and multiple directional changes. It extremely soft and flexible, contains non-DEHP [Bis (2-ethylhexyl) phthalate] plasticizers and has been tested rigorously to meet stringent standards for low temperature and corrosive chemical resistance. It stays flexible at temperatures as low as -67°F (-55°C), and its low durometer (40) provides minimal resistance to compression – making it ideal for low-torque or battery-driven peristaltic pumps and an excellent alternative to silicone tubing wherever corrosive chemicals are used.
Features & Benefits
- Soft and flexible
- Low-temperature resistant -67°F (-55°C)
- Resistant to corrosive chemicals
- Low durometer for use in low-torque pump applications
- Meets FDA requirements for food contact
Typical Applications
- Peristaltic pumps
- Vent and drain lines
Specifications
Inner Diameter in (mm) | Outer Diameter in (mm) | Wall Thickness in (mm) | Minimum Bend Radius in (mm) | Maximum Working Pressure Psi (Bar) | Vacuum Rating inHg (mmHg) |
---|---|---|---|---|---|
0.063 (1.59) | 0.188 (4.76) | 0.063 (1.59) | 0.125 (3) | 26 (1.8) | 29.9 (760) |
0.125 (3.18) | 0.25 (6.35) | 0.063 (1.59) | 0.375 (10) | 16 (1.1) | 29.9 (760) |
0.188 (4.76) | 0.313 (7.94) | 0.063 (1.59) | 0.625 (16) | 10 (0.7) | 15 (381) |
0.25 (6.35) | 0.375 (9.53) | 0.063 (1.59) | 1 (25) | 8 (0.6) | 7 (178) |
0.25 (6.35) | 0.5 (12.7) | 0.125 (3.18) | 0.625 (16) | 14 (0.9) | 29.9 (760) |
0.313 (7.94) | 0.438 (11.11) | 0.063 (1.59) | 1.375 (35) | 7 (0.5) | 5 (127) |
0.375 (9.53) | 0.5 (12.7) | 0.063 (1.59) | 1.75 (44) | 7 (0.5) | 3 (76) |
0.375 (9.53) | 0.625 (15.88) | 0.125 (3.18) | 1.125 (29) | 11 (0.8) | 15 (381) |
0.5 (12.7) | 0.625 (15.88) | 0.063 (1.59) | 2.875 (73) | 6 (0.4) | 2 (51) |
0.5 (12.7) | 0.75 (19.05) | 0.125 (3.18) | 1.75 (44) | 8 (0.6) | 7 (178) |
Physical Properties
Durometer Hardness Shore A (Shore D) | 40 |
Tensile Strength Psi (Mpa) | 1100 (7.6) |
Ultimate Elongation | 435 |
Tear Resistance, Ib-f/in (kN/m) | 104 (18.2) |
Specific Gravity | 1.1 |
Water Absorption | 0.29 |
Compression Set Constant Deflection | 55 |
Minimum Recommended Operating Temp °F (°C) | -67 (-55) |
Maximum Recommended Operating Temp °F (°C) | 125 (52) |
Brittleness by Impact Temp °F (°C) | -67 (-55) |
Tensile stress at 100% Elongation Psi (Mpa) | 286 (2) |
Characteristics
Markets |
|
Regulation |
|
Peristaltic Pump | Yes |