Versilon™ PFA

Flexible Tubing for Critical Fluid Transport
Versilon™ PFA from Saint-Gobain provides excellent chemical and diffusion resistance. This tubing is widely used in the semi-conductor, laboratory, environmental and pharmaceutical industries where ultrapure chemicals (including water) require precise quality control. It is also available in high-purity grades for extremely critical applications. These high-purity grades are ideal for applications that demand a very low level of extractables.
Features & Benefits
- High level of purity
- Excellent chemical resistance
- Translucent
- Retains higher mechanical strength at elevated temperatures compared to FEP
- High resistance to stress cracking
- Temperature resistant up to +260°C (500°F)
- Available also as colored tubing
Typical Applications
- Semiconductor industry
- Chemical processing/distribution
- Laboratory/pharmaceutical
- Environmental water sampling and analysis
- Cable coating
- Encapsulation
- Photovoltaic
- Valve and pump linings
Specifications
Inner Diameter in (mm) | Outer Diameter in (mm) | Wall Thickness in (mm) | Minimum Bend Radius in (mm) |
---|---|---|---|
0.063 (1.59) | 0.125 (3.18) | 0.031 (0.79) | 0.5 (13) |
0.063 (1.59) | 0.125 (3.18) | 0.031 (0.79) | 0.5 (13) |
0.125 (3.18) | 0.188 (4.76) | 0.031 (0.79) | 1.109 (28) |
0.125 (3.18) | 0.188 (4.76) | 0.031 (0.79) | 1.109 (28) |
0.188 (4.76) | 0.25 (6.35) | 0.031 (0.79) | 1 (25) |
0.188 (4.76) | 0.25 (6.35) | 0.031 (0.79) | 1 (25) |
0.156 (3.97) | 0.25 (6.35) | 0.047 (1.19) | 1.328 (34) |
0.156 (3.97) | 0.25 (6.35) | 0.047 (1.19) | 1.328 (34) |
0.125 (3.18) | 0.25 (6.35) | 0.063 (1.59) | 0.5 (13) |
0.125 (3.18) | 0.25 (6.35) | 0.063 (1.59) | 0.5 (13) |
0.25 (6.35) | 0.313 (7.94) | 0.031 (0.79) | 1.75 (44) |
0.25 (6.35) | 0.313 (7.94) | 0.031 (0.79) | 1.75 (44) |
0.188 (4.76) | 0.313 (7.94) | 0.063 (1.59) | 1.5 (38) |
0.188 (4.76) | 0.313 (7.94) | 0.063 (1.59) | 1.5 (38) |
0.313 (7.94) | 0.375 (9.53) | 0.031 (0.79) | 2.5 (64) |
0.313 (7.94) | 0.375 (9.53) | 0.031 (0.79) | 2.5 (64) |
0.25 (6.35) | 0.375 (9.53) | 0.063 (1.59) | |
0.25 (6.35) | 0.375 (9.53) | 0.063 (1.59) | |
0.375 (9.53) | 0.438 (11.11) | 0.031 (0.79) | |
0.375 (9.53) | 0.438 (11.11) | 0.031 (0.79) | |
0.438 (11.11) | 0.5 (12.7) | 0.031 (0.79) | 4 (102) |
0.438 (11.11) | 0.5 (12.7) | 0.031 (0.79) | 4 (102) |
0.375 (9.53) | 0.5 (12.7) | 0.063 (1.59) | 3.969 (101) |
0.375 (9.53) | 0.5 (12.7) | 0.063 (1.59) | 3.969 (101) |
0.5 (12.7) | 0.563 (14.29) | 0.031 (0.79) | |
0.5 (12.7) | 0.563 (14.29) | 0.031 (0.79) | |
0.5 (12.7) | 0.625 (15.88) | 0.063 (1.59) | 3 (76) |
0.5 (12.7) | 0.625 (15.88) | 0.063 (1.59) | 3 (76) |
0.625 (15.88) | 0.688 (17.46) | 0.031 (0.79) | |
0.625 (15.88) | 0.688 (17.46) | 0.031 (0.79) | |
0.688 (17.46) | 0.75 (19.05) | 0.031 (0.79) | |
0.688 (17.46) | 0.75 (19.05) | 0.031 (0.79) | |
0.625 (15.88) | 0.75 (19.05) | 0.063 (1.59) | 8.922 (227) |
0.625 (15.88) | 0.75 (19.05) | 0.063 (1.59) | 8.922 (227) |
0.75 (19.05) | 0.813 (20.64) | 0.031 (0.79) | |
0.75 (19.05) | 0.875 (22.23) | 0.063 (1.59) | |
0.75 (19.05) | 0.875 (22.23) | 0.063 (1.59) | |
0.875 (22.23) | 1 (25.4) | 0.063 (1.59) | 15.875 (403) |
0.875 (22.23) | 1 (25.4) | 0.063 (1.59) | 15.875 (403) |
0.118 (3) | 0.157 (4) | 0.02 (0.5) | 1.26 (32) |
0.157 (4) | 0.236 (6) | 0.039 (1) | 1.417 (36) |
0.236 (6) | 0.315 (8) | 0.039 (1) | 2.52 (64) |
0.236 (6) | 0.354 (9) | 0.059 (1.5) | 2.126 (54) |
0.315 (8) | 0.394 (10) | 0.039 (1) | 3.937 (100) |
0.354 (9) | 0.472 (12) | 0.059 (1.5) | 3.78 (96) |
0.394 (10) | 0.472 (12) | 0.039 (1) | 5.669 (144) |
Physical Properties
Durometer Hardness Shore A (Shore D) | (55) |
Tensile Strength Psi (Mpa) | 4000 (27.6) |
Ultimate Elongation | 300 |
Specific Gravity | 2.17 |
Water Absorption | 0.03 |
Minimum Recommended Operating Temp °F (°C) | -328 (-200) |
Maximum Recommended Operating Temp °F (°C) | 500 (260) |
Brittleness by Impact Temp °F (°C) | -320 (-196) |
Characteristics
Markets |
|
Peristaltic Pump | No |