Versilon™ Chlorine Transfer Hose

PVDF Braided Helically Convoluted Fluoropolymer Hose
Versilon™ Chlorine Transfer Hose from Saint-Gobain is specifically designed for transfer of heavily corrosive Chlorine. This hose is constructed with a one-piece extruded PTFE inner core and is reinforced with two high tensile strength PVDF braid for higher pressure handling. It is covered with a much thicker strand chafe-resistant PVDF to protect against abrasion. Fabricated with special material fitting to handle either dry or wet chlorines, Versilon™ Chlorine Transfer Hose assemblies are manufactured in accordance with Chlorine Institute Pamphlet 6 piping specifications and 100% tested before leaving our facility.
Features & Benefits
- Unexcelled chemical resistance for longer service life
- Not subject to stress corrosion, pinholing or flex cracking
- Convoluted inner tube is low profile and helical formed to promote self-drainage
- Moisture will not affect inner tube
- Does not need to be cleaned and capped after every use
- Minimum pressure drop for faster loading and unloading
- Lightweight and ultra-flexible for handling ease
- Low force to bend
- Can be inspected safely
- Wide hex flats for easy wrenching
Typical Applications
- Tank car loading/unloading
- Pulp and paper bleaching
- Chemical transfer
Specifications
Inner Diameter in (mm) | Outer Diameter in (mm) | Wall Thickness in (mm) | Minimum Bend Radius in (mm) | Maximum Working Pressure Psi (Bar) |
---|---|---|---|---|
1 (25.4) | 1.625 (41.28) | 0.313 (7.94) | 8 (203) | 375 (25.9) |
1 (25.4) | 1.625 (41.28) | 0.313 (7.94) | 8 (203) | 375 (25.9) |
0.5 (12.7) | 1 (25.4) | 0.25 (6.35) | 2.5 (64) | 500 (34.5) |
Characteristics
Regulation |
|
Peristaltic Pump | No |